| Grade | Fe | Cr | Ni | Mn | Si | C | P | S |
| SS 309S | 60% | 23% | 14% | 2% | 1% | 0.20% | 0.045% | 0.030% |
309S Stainless Steel Coil | 309S ss Coil Manufacturers in Mumbai
Home / 309S Stainless steel coil supplier
309S Stainless steel coil supplier
309S Stainless Steel Coil Supplier, 309S Stainless Steel Coil Manufacturer, 309S Stainless Steel Coil Provider.
salem treated steel 309 (UNS S30900) is an austenitic solidified steel made for use in high temperature disintegration hindrance applications. The composite restricts oxidation up to 1900°F (1038°C) under non-cyclic conditions. Visit warm cycling decreases oxidation insurance from around 1850°F (1010°C). Because of its high chromium and low nickel content, Alloy 309 can be utilized in sulfur containing atmospheres up to 1832°F (1000°C). The composite isn't proposed for use in significantly carburizing atmospheres since it shows simply moderate insurance from carbon osmosis. Amalgam 309 can be utilized in barely oxidizing, nitriding, setting and warm cycling applications, yet, the best help temperature must be lessened.
| Specification | ASTM A240 / ASME SA240 |
| Manufacturing Process | Hot Rolled (HR) / Cold Rolled (CR) |
| Grades | 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4304, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539 |
| Thickness | 0.6 MM TO 80 MM THICKNESS |
| Width | 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement |
| Length | 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement |
| Surface Finish | 2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available. |
Chemical Composition of Stainless Steel 309S Coil
ASTM A240 SS 309S Coil Mechanical Properties
| Yield Strength 0.2% Offset0 |
Ultimate Tensile Strength |
Elongation in 2 in. |
Hardness | ||
| psi (min.) | (MPa) | psi (min.) | (MPa) | % (min.) | (max.) |
| 45,000 | 310 | 85,000 | 586 | 50 | 202 (HBN) |
Stainless Steel 309S Coil Physical Properties
| Grade | Density (lb / cu. in.) | Specific Gravity | Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) | Electrical Resistivity (microhm-cm (at 68 Deg F)) | Melting Point (Deg F) | Modulus of Elasticity Tension |
| 309S | 0.287 | 7.9 | 0.12 | 468 | 2650 | 29 |
Equivalent Grades of 309S Stainless Steel Coil
| STANDARD | UNS | JIS | WERKSTOFF NR. | AFNOR | BS | GOST | EN |
| SS 309S | S30908 | SUS 309S | 1.4833 | – | – | – | – |
309 Stainless Steel Coil Supplier, Manufacturer, Provider
We Manufacture 309 Stainless Steel Coil Supplier to Ahmedabad, Andhra-Pardesh, Aurangabad, Banglore, Bhopal, Bihar, Chattiisgarh, Chennai, Cochin, Coimbatore, Delhi, Ernakulam, Erode, Goa, Gujarat, Haryana, Hosur, Hubli, Hyderabad, Indore, Jharkhand, Kanpur, kolkata, Madurai, Maharashtra, Manglore, Mohali, Mumbai, Mysore, Nagpur, Nashik, Navi-Mumbai, Pallakad, Pune, Punjab, Rae-Bareli, Rajkot, Rudrapur, Salem, Secunderabad, Surat, TamilNadu, Thrissur, Trichy, Tuticorin, Uttar-Pradesh, Vadodara. etc